The goal of Phase 1 was to construct a small scale pilot plant. This pilot plant is an operational unit and was built to be used to develop the process for producing magnesium hydroxide from a brine mixture. The process would include washing to remove any remaining impurities. During this phase the particle size and purity would be measured and tested to determine if this process would produce a marketable, economically viable product. During this Phase the process would be a tested to insure the finished product would have a consistent particle size and purity.

During the transition period from Phase 1 to Phase 2, tests are planned to be performed by the RAPA Technology group to determine if this product would have favorable results in various products. When favorable results are obtained from these tests Phase 2 will commence.

During Phase 2 our goals are:

• Full scale module design will be finished.
• A completed spec list of material needed to construct a full size plant will be included.
• A total estimated cost of all items required to build a full scale module will be assembled
• An energy audit report will be projected
• An operation manual will be written
• A report will be included that shows the projected costs of:
1. Raw material
2. Labor
3. Capitol requirements

To summarize, Phase 2 objectives will include all the necessary procedures and costs to construct and operate a complete module.

These goals may be a bit ambitious and are subject to change, as necessary, due to unforeseeable circumstances.